Vannin' Home
Posted By: KevinWangxxx Inside Floor and Rain Gutter. POR-15 - September 27th 2017 9:42 pm
So I just noticed my rain gutter in the back it bubbling up and showing some rust. Has anyone used or looked into the POR-15 Patch Seam Sealer for use on the rain gutters. Heres a link for the product on Amazon, http://a.co/5dmroOv

Also before I put down the Mass Loaded Vinyl with closed cell foam, Link: http://www.yahoosoundproofing.com/compositevinyl.html
I was thinking about coating the entire floor with POR-15 sliver or gray to protect it from rusting in the future. I Dont have any rust spots or holes, my van was garage kept its entire life with the original owner before I got it. So the underbody and inside are rust free as of right now.
Posted By: Dyno_Dave Re: Inside Floor and Rain Gutter. POR-15 - September 28th 2017 8:09 pm
POR-15 as a brush on paint is desined to bond to rough, rusty surfaces. It does not bond well to new, smooth metal or paint. Unless your whole floor surface is rusty (which it sounds like it is not), then that's probably not the thing to use.

I hope someone here has some experience with that POR-15 Patch product. I have a similar repair to do in the coming year.
Posted By: KevinWangxxx Re: Inside Floor and Rain Gutter. POR-15 - October 05th 2017 7:50 pm
Been doing a little more research and have found people saying Rust Bullet is better and more UV resistant, plus you can put it on paint, even sand it then paint it.

So I could sand out the gutter areas, coat it with the Rust Bullet, sand smooth and then paint them the same color as the rest of the van. I am also going to do the floor with it.

Has anyone else used it?

This is the one Im thinking about using:
https://www.amazon.com/dp/B0002P3IJ8/_encoding=UTF8?coliid=I2CHUPGERO4OVV&colid=1ZQC9L5ILWN7A
© Vannin' Community and Forums