Vannin' Home
Posted By: Matman 1980 chevy G10 window crank butchered - May 17th 2017 3:26 am
Hi, While (still) preparing my van for paint I decided to remove the quarter vents because
A.I`d do a better paint job and
B, I`d take the opportunity to renew the channel runners as the new belt sweep seals have arrived.
Anyway thats when I noticed one of the window crank mechanism arms had at some time in the past been broken and an attempt to weld it back on had been attempted. I removed the mechanism which is a non power window setup, and as you can see one `arm` is definitely `gone`. Now to look for a solution..


Attached picture winder 1.jpg
Attached picture winder 2.jpg
Oh man, wish you weren't in AU - I have a driver's side I just took out that you could have...

That's crazy, I've never seen those break before...
© Vannin' Community and Forums