Vannin' Home
Posted By: SDMickey Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 4:48 am
Hey guys; I may have a chance of getting a 1971-1975 G10 with Factory Cargo Doors. It looks like they are "Factory Ready" for Pop-Outs if that is how it is ordered. I can't imagine you have to swap doors out.

How much of a challenge would it be ? I want it to look Super Clean and Factory. They look like they have a spot on each cargo door for the factory Pop-Out Bracket.

Your experience and advice is Greatly appreciated. Thanks SDMickey
Posted By: frscke1 Re: Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 5:31 pm
Need pictures of the doors and of the inside bottom of the window area.…

factory "Cargo" doors don't have a place for windows.
Posted By: SDMickey Re: Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 5:54 pm
Here is the pic. I hope it worked.


Description: cargo doors
Attached picture cargo doors.jpg
Yup, you’d need different doors.
Posted By: frscke1 Re: Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 7:04 pm
Those doors are not for windows ..
Posted By: 1959 Re: Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 7:29 pm
D or V and frscke are correct. Inner door frame is kinda set up for windows but outer door skin is different than those with windows. If you want clean recessed factory look, these are not the door of choice.

BUT many folks love those doors because they have no windows.

The doors with fixed windows are the same as the doors with pop-out windows so find a pair of doors with factory windows. Window gaskets for fixed widows are different than the gaskets for pop-outs. I think glass is different too.
Posted By: frscke1 Re: Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 9:46 pm
there will be people wanting to trade you …. your doors for doors WITH pop out windows already installed....
Posted By: SDMickey Re: Installing Pop-Out Windows in a 1971-1975 G10 - April 27th 2020 11:05 pm
Thank you Gentlemen for the knowledge.
© Vannin' Community and Forums