Vannin' Home
Posted By: Boopvanner GMC G3500 bolt pattern change over - April 03rd 2019 5:01 pm

Ok bought a GMC G3500 1 ton van with 8 bolt wheels going to change it down to 5 bolt setup and bring the van down a bit in height...
Rear end is no problem just swap out the G3500 for a G2500 rear...but any idea what I'm getting into in the front end?
I was told I have to change the lower and upper control arms, spindles and rotors (rotors are a given)

Boopvanner
Posted By: frscke1 Re: GMC G3500 bolt pattern change over - April 03rd 2019 5:28 pm
Yep the G30 upper N lower a arms are different than a g20 g10.
© Vannin' Community and Forums