Vannin' Home
Posted By: DanielScum Th-350 Problems - November 13th 2020 5:00 pm
Hi everyone, can someone tell me why the gear oil is pressed out of the filler pipe in my case? I installed the TH-350. Lines from and to the gearbox are all new now, as is the additional cooler. I don't know any more ...
Posted By: CatFish Re: Th-350 Problems - November 13th 2020 6:35 pm
Originally Posted by DanielScum
Hi everyone, can someone tell me why the gear oil is pressed out of the filler pipe in my case? I installed the TH-350. Lines from and to the gearbox are all new now, as is the additional cooler. I don't know any more ...

Check the vent on the top of the transmission case. (It should be a small tube) Use a pipe cleaner to make sure it is open. (number 1 cause)

Make sure the cooler lines are not crossed and there is no coolant mixing with the fluid.

Make sure it's not over filled.
Posted By: DanielScum Re: Th-350 Problems - November 13th 2020 7:05 pm
Hi, I will Check the tips tomorrow. The lines are install correct.
Posted By: SDMickey Re: Th-350 Problems - December 28th 2020 1:30 am
Doc Catfish is the man !
© Vannin' Community and Forums