79 G20 sliding door problem - July 31st 2017 4:33 pm
79 g20 sliding door will not latch in the rear... Use to just have to push while shutting it firmly but doesnt work now. Stared at this for hours seems like and cannot understand why it will not stay latched. Front latches fine. What are the most common reasons for this?
Also dunno if I should start another thread but it cranks very slow after engine is hot. Has a non starter attached solenoid so wasnt thinking it could be heat soaked. Cleaned up all grounds. Cranks fine when cold, as many times as you want.
Crate goodwrench 350 engine if it matters.
Also dunno if I should start another thread but it cranks very slow after engine is hot. Has a non starter attached solenoid so wasnt thinking it could be heat soaked. Cleaned up all grounds. Cranks fine when cold, as many times as you want.
Crate goodwrench 350 engine if it matters.