Was able to do some welding today, little more body panel adjustment and fixing few holes in the floor. Guy before me had a bunch of cleaning equipment, and didnt know how to just make one hole to bolt things, he made a bunch. Took some pieces form what I cut out and patched the floor for support and keep things out...
Also, cut and shortened all three fuel lines, changed all o-rings, fuel filter and re-mounted fuel tank.
Fuel side is done...
Cut the exhaust up, going to try and re-build tomorrow, hopefully I can get it to fit, then weld it back up.
Lastly, hopefully I can get the ABS and all brake lines re-mounted without having to re-size too much.
Then hopefully be driving this thing home so I can get going on the air bags, shocks in the rear and all the welding that still needs to be done...