Vannin' Home Forums General Discussion Wheels and Tires fitting dodge 8 lugs to a chevy

Anyone done this before?

I bought a set of dodge 8 lug rims for cheap as they are 16" and my current wheels are 16.5".
It'll mean I don't have to import tyres from abroad (I'm in Ireland).

Now the bolt pattern is the same as I test fitted one to the front of my chevy (1979 G30) but the offset is different. Looks like I may need wheel spacers and possibly longer studs.
Any of you dodge guys know what taper angle is on the lug nuts these wheels take?

Any more info on the wheels may help.
I know so far they are 16" x 8" and were fitted to 2000-2002 Dodge Rams.
Bolt Pattern: 8 x 165.1mm/6.5".
Offset: 44mm.

Cheers guys.

dodge rims by shagedemus, on Flickr

I assume the typical 60 degree seat. I don't speak offset but backspace, you have 44 mm offset or about 1.75 ". Don't know if positive or negative offset, so you either have 5.75" or 2.25" back space. It's easier to take a strait edge on the back of the rim and measure to the matting surface of the rim. just compare the two. Aluminium rims typically require more torque, so you may want to go with the dodge specs. If the stud size is the same, the dodge stud may fit (longer). Good reference FMECAT.com.

Shaggy,

These are GM factory machined Alloys, the finest wheels in all the land. For under a Hundred bucks. Pretty impressive, for a stock GM wheel IMO. Frscke1 can explain why these are so valuable.

Your signature pic will look way better with GM Alloy wheels. These look Baddass. I get compliments all the time. Find a nice set, lug nuts and center caps, It will bolt right up. It will look nice. The Dodge wheel? Hmmmm. Pondering heavily on that, Mate!

The Dodge wheels can be sold to offset the cost. You won't be sorry. Cheers!


https://www.ebay.com/itm/16-OEM-Chevy-2500-HD-3500-Factory-Alloy-Wheel-Rim-Silverado-GMC-Sierra-5079/383154836409?_trkparms=aid%3D555021%26algo%3DPL.SIMRVI%26ao%3D1%26asc%3D20190711100440%26meid%3D26b12149165242c084bcff0e547974cd%26pid%3D100752%26rk%3D6%26rkt%3D13%26sd%3D192952232324%26itm%3D383154836409%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100752.m1982


https://www.ebay.com/itm/Chevy-2500-HD-16-8-Lug-Factory-OEM-Gmc-Duramax-Wheels-Tires/223674952545?hash=item341410eb61:g:01UAAOSwqwhdhj4r&vxp=mtr

They are billet rims .... started from a solid chunk of alum turned N milled they are 1/2 " thick walls.

Finding a set on my side of the Atlantic will be the problem. But I'll look.

Finally found a set I think these are the ones I'm looking for???????

chevy wheels1 by shagedemus, on Flickr

chevy wheels2 by shagedemus, on Flickr

chevy wheels3 by shagedemus, on Flickr

chevy wheels4 by shagedemus, on Flickr

Hmm. They look the same, I'll go out and see if mine have a date code. Mine take the threaded lugs that hold on the caps with the plastic nuts. I am unsure about different lug nuts without the caps, but thats the way I went. Ebay

Hmm. They look the same. GM factory. Mine take the threaded lug nuts that hold on the caps with the plastic nuts. I am unsure about different lug nuts without the caps, but thats the way I went. Ebay

Lug nuts and center cover ...

https://www.ebay.com/itm/2327399207...77rKt7gIVMBitBh3duAe_EAQYAiABEgL6xfD_BwE


https://www.hubcaphaven.com/p/23207...77rKt7gIVMBitBh3duAe_EAQYBSABEgIxfvD_BwE