So I found out something interesting while making the template for the floor. Nothing sticks to Flex Seal liquid. I’m pretty sure it’s silicone based so anything with adhesive just peels off.
so I’ve come up with different ideas of how to deal with this. It really only affects me where there’s no plywood.
I templated the entire floor of the van with heavy construction paper. I took my time but wanted to make sure I got a really good fit so I didn’t have to screw it into the floor, it just would be locked in on it’s own.
https://i.imgur.com/Vr1dnmD.mp4I laid out 3 pieces of 1/2†ply, traced the template over all three pieces at once so they line up properly once placed inside. I’m keeping the stock seat base studs so I drilled 1†holes for those knowing my template may not be 100% accurate there even though the paper went over all of them.
Cut, sanded and small little strips of wood to tie all the pieces together and she’s got a really solid floor now.