I was looking at the old canister today, has 3 ports, stamped Purge - Fuel Tank - Carb Bowl. What I find confusing is the Carb Bowl port is capped or plugged, wouldn't that be the one that would vent the carb. The hose from my Carb Bowl is attached to the Purge port. Like I mentioned before, I know very little about carbs or evap systems. Also on the old canister the Purge Port is 1/4" and on the new one it is 5/16", I guess I will have to use a some kind of fitting to make the hose fit the bigger port.

Last edited by Meanmachine; July 17th 2019 1:46 pm. Reason: sp