Vanning.com logo
Boxdin
Site Navigation


Advertisements
Recent Posts
Trailering a van help Please!
by SaltLakeNorseman. October 19th 2019 6:07 am
Phone Truck Obsession
by SaltLakeNorseman. October 19th 2019 5:20 am
Converting my G20 to RHD and 4x4
by Overdrive915. October 19th 2019 4:57 am
I Dream about Vans!
by SaltLakeNorseman. October 19th 2019 4:27 am
What is this piece ?
by PhilBiker. October 19th 2019 1:20 am
Parts for Dodge B200
by PhilBiker. October 19th 2019 1:16 am
'93 G30 in San Diego
by lukester. October 18th 2019 9:13 pm
Hi
by lukester. October 18th 2019 9:10 pm
1985 Dodge B150 fails emissions twice!
by Reed. October 18th 2019 8:01 pm
Mlarky's 92 Dodge maybe getting new drive train soon.
by mlarky. October 18th 2019 2:10 pm
Featured Links
Vanning.Com is a an authorized Amsoil Dealer


Previous Thread
Next Thread
Print Thread
Rate Thread
79 G20 Hard Fuel Line-Fuel Pump to Carb #746420
March 20th 2019 12:30 pm
March 20th 2019 12:30 pm
Joined: Sep 2013
Posts: 5
Orangevale,Ca
G
graybeard Offline OP
stranger
graybeard  Offline OP
stranger
G
Joined: Sep 2013
Posts: 5
Orangevale,Ca
Not having any success finding a source to replace the hard tube line that is configured to put on my 1979 Chevy Van G20, 350 motor. Local auto stores do not have access nor cross reference of same engine/year used on other lines/models. They want to sell a section of straight line with the fittings and you bent it to fit. As the 90 degree bend at the fuel pump connection is very short, a hand tube bender can't be used with the flair so close.  I have had no success, either on line. 

Help is appreciated.

Re: 79 G20 Hard Fuel Line-Fuel Pump to Carb [Re: graybeard] #746434
March 20th 2019 8:21 pm
March 20th 2019 8:21 pm
Joined: Mar 2011
Posts: 348
NY
J
jcd74 Offline
enthusiast
jcd74  Offline
enthusiast
J
Joined: Mar 2011
Posts: 348
NY
You just have to keep at it, you can go thru 2 lines before you get it right. Home depot sells a tubing bender for around 20 bucks, last time it was gray. Push the fitting at the flare and bend a 90, then bend it a little more with your thumbs. Aim for the back edge of the balancer, Then bend a 90 up at the edge of the balancer close enough to make you worry it will rub. There is just enough room to get a back to back bend. Then you want to figure on the offset bend getting the line to come up behind the pump inside just. Aww hell pm me your addsress I'll mail you one.

Re: 79 G20 Hard Fuel Line-Fuel Pump to Carb [Re: graybeard] #746447
March 21st 2019 11:41 am
March 21st 2019 11:41 am
Joined: Nov 2013
Posts: 3,459
Michigan
Dyno_Dave Offline
pooh-bah
Dyno_Dave  Offline
pooh-bah
Joined: Nov 2013
Posts: 3,459
Michigan
Have you checked with these folks?

Inline Tube Link

Re: 79 G20 Hard Fuel Line-Fuel Pump to Carb [Re: graybeard] #747911
May 02nd 2019 12:25 am
May 02nd 2019 12:25 am
Joined: Nov 2002
Posts: 1,578
Morris Plains, NJ USA
Munz Offline
veteran
Munz  Offline
veteran
Joined: Nov 2002
Posts: 1,578
Morris Plains, NJ USA
Summit and Jegs both have them. Even Stainless Steel.


Munzvan@aol.com / Runnin Wild Truckers / I never met a van I didn't like.
[Linked Image]
Re: 79 G20 Hard Fuel Line-Fuel Pump to Carb [Re: graybeard] #747919
May 02nd 2019 5:39 am
May 02nd 2019 5:39 am
Joined: Jan 2014
Posts: 559
Staunton, VA
kursed Offline
addict
kursed  Offline
addict
Joined: Jan 2014
Posts: 559
Staunton, VA
I've had plenty luck running rubber line from the pump to the carb in all my years on tons of trucks and cars. Put a brass nipple in the pump, run the hose to the carb, brass nipple in the carb. Just be VERY careful where you route the hose to keep it away from the manifolds or headers, and watch for possible pinch points. Never had a fuel leak related to the hose either. I did pop one of those glass filters once, but that was due to my poor mounting job and it bounced off the intake. DOH!


[Linked Image]

Moderated by  Astro 

Donate


Upcoming Events
discovery
Who's Online Now
0 registered members (), 2 guests, and 1 spider.
Key: Admin, Global Mod, Mod
Newest Members
SaltLakeNorseman, SQFVanners, GRUGVan, ResbeardFL, Brocklanders
11185 Registered Users
Top Posters(30 Days)
frscke1 59
Reed 39
Wedgy 26
shaggy 18
Eden 17
Forum Statistics
Forums68
Topics36,457
Posts524,618
Members11,185
Most Online177
May 8th, 2013

Powered by UBB.threads™ PHP Forum Software 7.6.1.1