What's up guys! I've got a 1986 Dodge B250. The previous owner through some pretty tiny tires on it (220/70) and it looks real wonky. I've been looking to upgrade for a while, but first I wanted to track down some stock aluminum rims that looks something like this:
After a lot of hunting, I found a pair on craigslist for $150. They were off a 90s half ton truck. After buying them, I realized that these are not stock rims - they've just got the same appearance. These rims are 10 inches wide with 4 inches of backspacing (measured from the back of the flange to the edge)
I took a few measurements, and it looks like these will fit. But it's pretty close. Worse case scenario, I think I might need to use a 1" spacer.
Has anyone run these size rims on the front of a B-series van? I see lots of people running them in the back, but it seems like everyone goes for 8" rims in the front.
my plan was to mount some 255/60s on there.