Hello to all vanning people from Finland
Having problems with stop lights. Turn signals and hazard warning are working but not anymore stop lights.
Have followed instructions from my Chrysler 1986 Service Manual for making " Checking continuity".
'
Fuse 7 is ok. Where can I locate splice called M1 ? Good grounding with extra soldered grounf wire. Bulps are working ( measured with ohmmeter ).
Opened physically stop lamp brake switch - it is working without problems. There is 6 wires. Manual is telling these colors but car has different colours.
Manual tells 18 White o o 18 Pink these are connected when brake pedal is not pushed
____
18 Dark Blue o____o 18 Dark Blue these are connected when brake pedal is not pushed
18 White / Red o____o 18 White these are connected together when after brake pedal is pushed
In my Dodge RAM Prospector year 1989 V8 318 with automat transmission
18 Dark blue / Red o o 18 Yellow / Red these are connected when brake pedal is not pushed
____
18 White / Red o____o 18 Black these are connected when brake pedal is not pushed
18 Dark Green o____o 18 White these are connected when brake pedal is not pushed
Continuined - when brake pushed then wires
18 White / Red ----- 18 Black and 18 Dark Green ----- 18 White
are connected.
When not pressing brake pedal 18 Dark Green and 18 White have connection.
Disconnected turn signal harness from body wiring harness. Measured with ohmmeter.
Ohmmeter is working. Using multimeter on ohm are. Probes are good.
Does anybody have picture or information about these wires that are soldered to plastical component with plastic window in steering column ?
Copy of page B27 from service manual
http://s350.photobucket.com/user/Prospectorvan/media/B27a_zpslzqcvtol.jpg.htmlstopCopy of page B28 from service manual
http://s350.photobucket.com/user/Prospectorvan/media/B28_zpsit6nwzcv.jpg.htmlCopy of page where displaned prosedure about making continuity test
http://s350.photobucket.com/user/Prospectorvan/media/Checking%20continuity_zpsqx3ctwcu.jpg.html