Hi, While (still) preparing my van for paint I decided to remove the quarter vents because
A.I`d do a better paint job and
B, I`d take the opportunity to renew the channel runners as the new belt sweep seals have arrived.
Anyway thats when I noticed one of the window crank mechanism arms had at some time in the past been broken and an attempt to weld it back on had been attempted. I removed the mechanism which is a non power window setup, and as you can see one `arm` is definitely `gone`. Now to look for a solution..

Attached Files
winder 1.jpg (10 downloads)
winder 2.jpg (10 downloads)