It was like Christmas in August here on Sunday.
I got my Master Bedroom project done and now I can start getting van stuff done again.....
Nate stopped by with a big box of parts that I was in need of.
I was working on coverting the Beast of Burden over to an Early 3rd gen resto mod.
Nate brought me the parts so I can finish this off on the 89.
Ford engeneers working for GM complacated this mod a little bit.
The plastic push ins have to be rewmoveed so the earier tail light base will set flush in the hole.
A small notch needs to be cut in the gusset in thew hole also.Or the original mounting stud needs to be cut off....
The stainless trim rings fit snugly in place...
once the lenses are bolted into place the flanges on the trime rings will hold evey thing in.
I will need to come up with a set of the "clip nuts" and the right machine screws to hold every thing in place.....
you will also need the original plugs/wiring from the mid 70's tail light bases...
I also got a sweet set of Beuville markers for this van ....
Man I love my Chevys........
A big thank you goes out to Nate for the sweet deal on these parts.........
..........Wookee