Friday's project was to mount the tail end of the tranny. This is the before picture. I'll get the after picture next time... had to cut the pathfinder equipment company bracket and move the tabs some. Added 2 plates to weld the body brace to. The brace on a 92 EWB is apparently in a different spot than it is on a 78 SWB. Mounted ,tightened, cut, jacked, measured, tacked, measured again, welded. It is in and solid. I'll add another piece of angle iron to the front edge to box it in later.

Attached Files 20190614_175705.jpg

85 Chevy SWB G20 292 w/ 3 on the tree (had it in high school)
78 Chevy SWB G30 350 700r4 Pathfinder 4x4 conversion (wrecked in 08)
92 Chevy EWB G30 350 4l80e (bought with 587k miles for the body. Getting transplants from wrecked 78. Then big block)
Various minis over the years.