Now onto the interior, which is still a work in progress. I wanted to change out the steering wheel, front seats, and redo the headliner. I was able to tackle the steering wheel over this past weekend, and will hopefully get to the other stuff soon.

I used a NRG short hub to mount an aftermarket steering wheel. Removing the stock steering wheel took quite a bit of effort - I highly recommend using a steering wheel puller to remove it properly without potentially damaging anything. Using that particular hub required the removal of the clock spring, which was problematic as that would mean the horn wouldn't work. So I wired up a small push button to activate the horn and mounted it on the steering column, a little ways back so it is not accidentally bumped. I'm in the process of modifying a center horn button that will fit in the middle to cover up the unsightly hole, so please excuse the work in progress.

[Linked Image]


Here is the NRG short hub I used. (The part number is NRG SRK-170H)

[Linked Image]

[Linked Image]