I'm not happy with the wiring coming out of my aftermarket Stereo and could use some suggestions on routing. The amplifier is mounted under the drivers seat and powers the Dash Speakers I installed. Front speakers in the door and rear speakers near the rear cargo doors come off new aftermarket stereo harness.
The wiring from the stereo is routed around the engine "doghouse" cover then under the carpet to the amplifier inputs. Amplifier outputs are routed alongside the same wires back to the speaker harness for the front dash speakers.

Amplifier power is run down the left side of the engine and under the carpet. It looks like a tangled mess right now.