Hi there

I am new here, and new to Vans, and new to America... Whole load of newness going on!

I picked up a 1975 G10 van last week, and it turns out that the tracking issue i was having is because the passenger side lower control arm is all bent out of shape.

From what i can work out the upper control arm is a pretty generic Chevrolet part and there are third party suppliers.

However, I can't find a lower control arm. Might have found one in a breakers in Arizona, but does anyone know if the lower control arm from a C10 would work.

Also while i am at it i was thinking of dropping the front two inches... a drop spindle perhaps. I have had a search as I am sure that this has been done before, but don't seem to be able to find anything.

Many thanks, all help gratefully received.

T