Vannin' Home
Posted By: BenDodge Oval Leaf Spring Bushings - June 16th 2012 11:46 pm
Mopar no longer sells them...

I found these, might be a reasonable upgrade...if they fit.

Anyone familiar with the 70's Dodge Coronet and others to confirm these might work?

My oval is 2" by 3" Oval Inside Diameter (2.5" leaf)?

http://www.prothanesuspensionparts.com/proddetail.asp?prod=5.2110
Posted By: RamVan2500 Re: Oval Leaf Spring Bushings - June 17th 2012 2:15 am
of course mopar doesn't because they suck. stangel bros might have them though
Posted By: BenDodge Re: Oval Leaf Spring Bushings - June 19th 2012 2:08 pm
Stengel Bros lists it as discountinued as well, offered to sell me a new leaf pack....

Anyone know of a source for the Front Oval Bushing? The Dodge Caravan has front ovals, part number SB364, but I think the cross bolt diameter might be too small, although unconfirmed.
Posted By: inxs Re: Oval Leaf Spring Bushings - June 19th 2012 3:41 pm
hi,
i have found the oval bushings this year. try espo i-800 903 9019 my notes have been lost.
these were not cheap about $85.00 if i remember right.
Posted By: RamVan2500 Re: Oval Leaf Spring Bushings - June 19th 2012 5:30 pm
Yea I'm buying new leaf springs, bolts, and bushings from them for my Ram Van 2500. Upgrading from the weak 1800# to a 2300#. I would of gone 2500# but that is too much extra capacity for me!
Posted By: Toaster34 Re: Oval Leaf Spring Bushings - June 01st 2016 3:38 pm
I just got off the phone with Moog and Federal Mogul, and they have the oval bushing listed as a Moog Part Number SB364 described as 3" x 2". This is the same part as used on the B-Bodies in the 70's as well.
Listed at 28.19 each. I am going to buy them and see if they fit. If they don't I'll let you all know.

Posted By: Toaster34 Re: Oval Leaf Spring Bushings - June 14th 2016 11:32 pm
You are correct. The bolt on that bushing is 1/2. My B-200 needs 5/8.
© Vannin' Community and Forums