Vannin' Home Forums General Discussion Electronics POWER LOCKS

Ok so I bought power doors for my van I also bought a factory harnes out of a junk van I got the power windows working but cant get the locks working I already did the obvious and jumped both the acuators to make sure they work so then I figured it was the relay so I bought a new relay and still nothing what are the chances the switches would be bad any thoughts

Perhaps there's bad ground connections with the door wiring?

The switches are simple switches; you should be able to simulate a switch closing by putting a jumper wire across it.

Do you have the schematic for your door lock system wiring? One of us may be able to come up with something if you don't have it.