Hi all
I am wanting to get my van re-sprayed next year. The body work is generally in good condition for its age. But it needs some work to small dents and some corrosion patches.
Because of the size i would imaging the re-spray is going to cost a bit, so if im getting done i want it to be done right, so it will last.
most of the rust seems to be situated around the windows.
windscreen:
Q1) will the windscreen need to be pulled out to fix this rust, can i get away with just removing the top seal
big side windows
Q2) Also will these windows need to be pulled, I cant find replacement seals for these (any ideas)?
Door & wheel arch
Q3) the rest of the rust is like this, do i have to cut these out, or can i just grind down to metal to before spraying.
Q4) should i be able to takle the prep work myself to keep the cost down. Im quite handy.
any pointers most welcome as im new to this
thanks
phil