Worked a few hour in garage today!
Finished framin out the frame of mold
havent desided yet to put a big bead of liquid nails,or silicone caulk down on all surfaces and press mold surface on it or what.......
fits good after some square-in up and this an dat....
gota clean up the PVA off it,stuff seems to be alot better than the paste wax,less wax to clean up,It says to apply a mist coat,let dry(15-20mins)the put a "flood" coat,an let dry fully,then 2nd flood coat,well I already had good heavy coat of paste wax on it so...it really didn't need any PVA but I wanted to try it and just put mist coat on and 1 heavy coat,guess that it not being as thick of layer of PVA it really didnt peel like clear wrap,but I can C how all the layers would make it peel off alot better,peeled ok tho....It wipes off witt warm water so....
All this work makin this thing don't know if I will get to make a door before winter!
But I guess havin the mold is 3/4 was their