Needs to be assembled after I weld in a new windshield frame.
Finally have all the tools and pieces required.
Now all I need is the time, the one thing I have in short supply.
What is involved:
Wiring in the front to be removed, possibly repaired.
Rusted w/s frame cut out, replacement section welded in and some fab work for the gaps.
Gas tank straps, it looks like one may have broken.
Minor engine work, I thing the bearing in the water pump is shot. Engine runs, but valves float pretty damn quick with the 4.11 gear rear end.
Any suggestions appreciated, even just moral support.
I might have to relocate, so if this sucker will move under it's own power it will make life a little easier.
Currently, it's looking like this:
It's been inside, so it's not deteriorating any further, at least not rapidly.
Wish me luck!