well one of the last weekends of the year i'm sure that will be kinda nice out . I had to get the chevy running that took most of my Saturday up and i had a bad head ache as it was running to rich and it took the rest of the day to get rid of .
So come sunday was dodge day i went out and set up to work on the front corners . I had to cut out a small rust spot on the passenger side . from there i grinded it down and treated the area with rust mort .
while this was drying i set out on the driver's side corner . I re-cleaned the area and welded it up and welded the holes in the window frame .
a small copper backing was used to help fill the holes in .
Welded up and started to grind it down ..
Pretty much done here although i have to figure out what to do with the rain gutters as the newer ones are rolled the the original ones are folded .
A coat of duraglass to keep the rust from forming in the welded areas is applied .