Metro rubber needs input #412998 September 23rd 2010 12:15 pm | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I posted this on the Dodge van forum, but wanted to post it here too!! The more exposure and replies the better.
I found the top header rubber for the side and rear doors on my '75 Dodge B200 at Metro Rubber so I decided to ask about the door seals and such. Well I got an e mail back;
Thanks for the inquiry. We are aware of our lack of parts for these vans, and I agree it would probably be a good project to consider. However, we have not received much in the way of interest and I have yet to find any OEM or gently used parts to assess. If this is something you or your club could help us with, I'd be willing to look some parts over and determine the feasibility of adding replacement parts to this line. Thanks for your interest in Metro Moulded Parts and I look forward to hearing from you.
Best regards, Mike Hinshaw New Product Development Manager Metro Moulded Parts, Inc. 11610 Jay Street, P.O. Box 48130 Minneapolis, MN 55448 Direct Phone: (763) 231-7836 FAX: (763) 757-7228 E-mail: mikeh@metrommp.com
So if we all e mail Mike we might get what we want. Lets do this!!
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Oct 2001 Posts: 28,125 Madman! | Madman! Joined: Oct 2001 Posts: 28,125 | This is GREAT. Maybe this should be posted in the Ford and Chevy sections also. They may be able to help those van owners also. | | | Re: Metro rubber needs input | Joined: Aug 2001 Posts: 12,107 Likes: 37 Maniac | Maniac Joined: Aug 2001 Posts: 12,107 Likes: 37 | Would the weatherstrips for mid Dodges be the same as 79-up? I would be interested in all weatherstripping for 79-up vans, doors, windows, side and rear doors, triangle vent windows, everything.
Windows- they're what make a van worth owning! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I believe that '79 and up is still available. I think the numbers supersede to newer ones. The '71-'77 are the hard ones. No one makes much for these. Only front door rubber is reproduced and NOS parts are getting, if not impossible to find!
As for Ford and Chevy since I don't own one I don't know their parts situation. From what I have heard from others the parts were easier to get then for the mid Dodges. So if the case is that they are in the same boat heck why not ask about them too!! wouldn't hurt. We are all vanner brothers no matter what van we drive.
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2009 Posts: 1,170 old hand | old hand Joined: Jun 2009 Posts: 1,170 | The profile and shape of the later rubber is the same, but the pin location is different.
Someone on the B-van site used the later rubber on a mid by gluing and says it works fine.
I am all for this. I have been in contact with a company called restoration specialties about re-popping them and they need a complete NOS to decide if the tooling is worth it. If I do run across a set, I am half-minded to do it myself. Ever since I bought mine and discovered how few parts are available, I have been tossing around the idea to start making (or having made) some of these parts and see if it turns into a viable company.
I need something to do with all of my spare time and I could use my next van as a deduction. | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I have a NOS ( part #'s match the originals on there now)set of rear door rubber in great shape (I am still trying to live without an arm and a leg)I would be willing to send them if we get enough interested and if someone has the side cargo doors and are willing to send them too!! That way if and when they make them we wouldn't have to use the NOS ones and everyone else wins.
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Aug 2001 Posts: 12,107 Likes: 37 Maniac | Maniac Joined: Aug 2001 Posts: 12,107 Likes: 37 | I bought what I was told was one of the last three sets in the dealer parts system of side cargo door weatherstrip for my brother's 83 Dodge van about three years ago. I doubt the side and rear cargo door weatherstrip is still available new. I haven't found any aftermarket suppliers for it. Front doors, yeah, side and rear? Nope.
Windows- they're what make a van worth owning! | | | Re: Metro rubber needs input | Joined: Feb 2005 Posts: 1,675 Likes: 1 co-chairman, Southeast Van Council | co-chairman, Southeast Van Council Joined: Feb 2005 Posts: 1,675 Likes: 1 | I don't think finding interest is a problem. The problem has been getting a set of strips for the manufacturers to make a mold of. I'll be emailing them.
Bama Vans Motto: Use It Up, Wear It Out, Eat It All!
The magic carpet waits for you, so don't you be late - Jimi Hendrix
| | | Re: Metro rubber needs input | Joined: May 2006 Posts: 4,460 pooh-bah | pooh-bah Joined: May 2006 Posts: 4,460 | do they make stuff for an astro too?
2003 Grand Caravan Member Vanatics Van Club-Spfld, IL Member Florida Van Council Member Central Florida Vans,-Orlando, FL | | | Re: Metro rubber needs input | Joined: Sep 2008 Posts: 1,229 old hand | old hand Joined: Sep 2008 Posts: 1,229 | If someone has at least a side or back barn door set they are the same just longer on side doors and I'm sure that they could be re-poped by just making it longer/shorter.The profile hasn't been the problem in my asking around it's the 'header' end pieces which are unique to Dodges on the left hand side door and left hand rear door.Not sure how different 77 back is from 78 up as far as profile and header piece.I'm up for Email'n but getting somebody to 'donate'(loan) a NOS set for inspection/measuring will take a big'ol leap of faith and trust that it'll come back someday unharmed and not 'lost in the mail'.Hope somebody does as I'm in for 4 Dodges worth.
79 B300 4x4,80 B100,83 B150.If it's not a van I just don't understand it.
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I posted earlier that I have a NOS set for the back doors, that if we do get enough interest and Metro wants to do it I could send them. I also looked at my side doors and the rubber especially at the ends look good enough to copy. So I could probably send them too!
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Feb 2007 Posts: 6,266 Vanner Extraordinaire | Vanner Extraordinaire Joined: Feb 2007 Posts: 6,266 | Tim from Ky has an angle on some impossible to find rubber stuff for first gen Econos. From what I understand, he took one of his vans to Carlisle and left it with the R&D department for research.
Howard "Nickels and Dymes" Midwest Vans Ltd. Vanfest Staff Ontario Federation of Vanners Rep since 1978 National Truck-In Board since 1986 First van event-a hall party...March, 1974...ain't been right since!!!!!
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | OK, I talked to Mike at Metro and he said only 7 people e-mailed him. Not to good knowing how many people need this stuff. I talked to him some more and it looks like I convinced him there is a market. He wants me to send my NOS rear barn door rubber for evaluation. So if all goes as planned there will be repro rear door rubber. Then next side door rubber, but we have to find some good ones. Mine are good around the ends and are dry rotted about every where else. If the core is the same as the rear and the ends are all that matters then maybe they could work with what I have unless someone has NOS! Let's hope for the best,
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Sorry I forgot to email him. Sent an email! Hope they make this. Too bad I have no good rubber to contribute.
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 107 member | member Joined: Jun 2010 Posts: 107 | Wonder if at some point we might get them interested in reproducing the rubber traction step pads, on the side door openings.
At this point, it's looking like I will in fact buy from Metro the drivers door seal I need. Fingers crossed they will eventually do the sliding door, single rear door, and siamsed pop out windows too.
Already emailed them too.
'76 B200 Sportsman Royal SE D-code/440 auto/727
'76 W200 Adventurer Crew Cab D-code/440 4spd/NP435
| | | Re: Metro rubber needs input | Joined: Aug 2005 Posts: 21,211 Likes: 25 Supreme Master | Supreme Master Joined: Aug 2005 Posts: 21,211 Likes: 25 | Metro already makes all the door rubbers for the Chevy vans...why not the Dodges?
Another place you could try is Restoration Specialites out of PA. They carry a HUGE selection of parts namely for older vehicles including the early Chevys, Fords, and Dodge vans.
Nate Breece | | | Re: Metro rubber needs input | Joined: Jun 2009 Posts: 1,170 old hand | old hand Joined: Jun 2009 Posts: 1,170 | Nate, I was talking with RS at one point and they seemed less than interested in taking it on. | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Mike just sent me the address where to ship them to. So today I will package them up and send them to him. Hopefully soon we will have the rear barn door rubber, then off to the other parts of the van. Would be nice to someday order a complete rubber kit for a '71-'77 Dodge van. Lets keep bugging them!!! So if anyone else has NOS or good rubber let them know.
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Great news for 71-77 Dodge owners!!!!! I just received this e-mail from Mike at Metro Rubber.
Richard,
You will be happy to learn that we have begun the back cargo door seals project for the ’71-’77 Dodge B-Series van today. Metro P/N LM 123-VA for the left door and P/N LM 123-VB for the right. We hope to have a prototype ready to test by the end of 2011.
As far as the side cargo door seals, I am seeing some variation in samples I have complied so far—specifically with the molded ends. My guess is there was some kind of rolling change performed but further research will be needed to ascertain what exactly is what. Any info you and your community can provide will be appreciated and ultimately speed up our ability to develop the side cargo seals as well.
Best regards,
~Mike
They are going to be the first ones to make these. So now we can replace all the tired, torn up ones we have been nursing. Now he needs more info on the side door as he states the main difference is the ends. I am asking people that know these vehicles inside out for possible changes in the ends for those specified years. Part #'s, bulletins or such. Could you state them so I could let Mike know. Then the side doors will be done. Then the one piece doors will be next.
Finally all the e-mails and pushing has payed off!!!!!!
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Aug 2008 Posts: 18,213 Likes: 2 Supreme Master | Supreme Master Joined: Aug 2008 Posts: 18,213 Likes: 2 |
Everyday above ground is a Good Day!!! Never Stop Vannin'
Member of Break Away Vanners Host of Spring Break At Shenandoah Acres Family Campground
Owner & Creator of Wizard's Van-In Videos Member of Riding High Truckers from 1982 to 1996 2nd Member of The Toopa Sinner Tribe Member of Free Bird Vanners 1996 to Present Member of Cape Atlantic Truckers South Jersey Host Club of Freeze Out Certified Nats Judge Member of Shenandoah Valley Vans | | | Re: Metro rubber needs input | Joined: Apr 2003 Posts: 7,662 Likes: 2 carpal tunnel | carpal tunnel Joined: Apr 2003 Posts: 7,662 Likes: 2 | Restoration Specialties is Ok but they also have been know to by parts from placecs like steel rubber repackage them and sell them as there own......
........Wookee
Last edited by wookee; October 20th 2011 5:49 pm.
Its a "Van Thing" A life style you have to LIVE to understand! Vintage Chevy Van Club
| | | Re: Metro rubber needs input | Joined: Feb 2010 Posts: 1,215 old hand | old hand Joined: Feb 2010 Posts: 1,215 | Oh, finally...now my van won't be wicking water while it's outside.
Wookee, might wanna re-read. | | | Re: Metro rubber needs input | Joined: Apr 2003 Posts: 7,662 Likes: 2 carpal tunnel | carpal tunnel Joined: Apr 2003 Posts: 7,662 Likes: 2 | I read correctly.......
.........Wookee
Its a "Van Thing" A life style you have to LIVE to understand! Vintage Chevy Van Club
| | | Re: Metro rubber needs input | Joined: Oct 2009 Posts: 2,825 veteran | veteran Joined: Oct 2009 Posts: 2,825 | Cool they need to also make it in coils to sell it buy the foot so we can use it on our gullwing doors also I could use 100 ft
Last edited by heavy389; October 20th 2011 8:28 pm.
79 B-200
| | | Re: Metro rubber needs input | Joined: Dec 2009 Posts: 1,037 old hand | old hand Joined: Dec 2009 Posts: 1,037 | lets not forget us poor old sliding side door if they sell it by the roll i can make it work , my van would be brand new with all new door rubber ~~ did i hear you say air tight ~~ | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Just in time! My van is almost done with paint/body and NEEDS new rubber I'll definitely check this out as soon as I have her back
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Aug 2010 Posts: 336 enthusiast | enthusiast Joined: Aug 2010 Posts: 336 | i have a 79 b200 and need all door rubber. have side and rear cargo doors. cant find it anywhere. i will email mike. tired of having towels near the doors to catch the rain water. purplesporty17@hotmail.com | | | Re: Metro rubber needs input | Joined: Aug 2005 Posts: 21,211 Likes: 25 Supreme Master | Supreme Master Joined: Aug 2005 Posts: 21,211 Likes: 25 | Hmmmmm. Those part numbers they gave seem to be for the front doors. ???
Nate Breece | | | Re: Metro rubber needs input | Joined: Aug 2008 Posts: 18,213 Likes: 2 Supreme Master | Supreme Master Joined: Aug 2008 Posts: 18,213 Likes: 2 |
Everyday above ground is a Good Day!!! Never Stop Vannin'
Member of Break Away Vanners Host of Spring Break At Shenandoah Acres Family Campground
Owner & Creator of Wizard's Van-In Videos Member of Riding High Truckers from 1982 to 1996 2nd Member of The Toopa Sinner Tribe Member of Free Bird Vanners 1996 to Present Member of Cape Atlantic Truckers South Jersey Host Club of Freeze Out Certified Nats Judge Member of Shenandoah Valley Vans | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | No the front doors are LM-123VL/VR and the rear doors are LM-123VA/VB. Different letters at the end.
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I e-mailed Mike at Metro about also making the w/strip with out the ends for the people with gullwing and one piece doors. He e-mailed me back to call him so we can discuss the various ways of making these. Also, he wants all the P#'s for the side barn doors for '71-'77. I have the ones on the '71-77 Mopar Van forum and the ones in my factory parts book for '74-77. Is there any more? The rear doors he has my original off my '75 also NOS ones I bought that has the same P#'s. So the backs should be correct for '71-'77. So now if we can get him to make rolls with out ends that would be great.
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 107 member | member Joined: Jun 2010 Posts: 107 | Any info for the sliding side door, or single rear door???? Great to hear Metro is moving forward with more help on seals.
'76 B200 Sportsman Royal SE D-code/440 auto/727
'76 W200 Adventurer Crew Cab D-code/440 4spd/NP435
| | | Re: Metro rubber needs input | Joined: Aug 2008 Posts: 18,213 Likes: 2 Supreme Master | Supreme Master Joined: Aug 2008 Posts: 18,213 Likes: 2 | Weatherstrip for Gullwings would be Great
Everyday above ground is a Good Day!!! Never Stop Vannin'
Member of Break Away Vanners Host of Spring Break At Shenandoah Acres Family Campground
Owner & Creator of Wizard's Van-In Videos Member of Riding High Truckers from 1982 to 1996 2nd Member of The Toopa Sinner Tribe Member of Free Bird Vanners 1996 to Present Member of Cape Atlantic Truckers South Jersey Host Club of Freeze Out Certified Nats Judge Member of Shenandoah Valley Vans | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I just got off the phone with Mike at Metro. There is some conflict with the end of one of the side doors. He has mine and another one that was sent and the ends don't match. He doesn't want to make two different styles. This is the one end that is different. If you have this end let me know what year van it's on and if it's top or bottom. He's trying to get the P# off this one, but it is pretty well worn. If you could give the P# off your side rubber and what year of van it will help. He wants to make sure that all the door seals will fit '71-'77 models. He also stated they will sell it by the foot with out the ends and pins. Hopefully that will help others with out barn doors!!! Maybe gullwing or one piece doors? Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 107 member | member Joined: Jun 2010 Posts: 107 | Off topic, but it just occurred to me. I wonder if someplace like Metro, could also remake the custom footwell rubber step pads. We've all seen the aftermarket ones, that said the make of van. Sure wish those were also easier to come by. Was wishfully thinking perhaps the same equipment, just with a different mold, could also make those.
But, on the selling the seal material by the foot, that absolutly should work quite well. I'm about to try useing some, from another vehicle, and it is identical to stuff I've already seen, sold by the foot.
Thanks for the efforts, and prodding of Metro. I had some contact with them as well, a while back, and wondered if they might be the ones. To eventually help us out here.
'76 B200 Sportsman Royal SE D-code/440 auto/727
'76 W200 Adventurer Crew Cab D-code/440 4spd/NP435
| | | Re: Metro rubber needs input | Joined: Mar 2007 Posts: 4,463 Likes: 12 pooh-bah | pooh-bah Joined: Mar 2007 Posts: 4,463 Likes: 12 | Good work FinallyaVanner! I'm keenly interested in getting these into production to support Vanners! Here's everything I've got which might be useful to you. I have all the Dodge dealer's parts catalogs from 1978 to 2005, but I don't have a parts catalog for as early as a 1977. The earliest I have is my 78-81 Light Duty Truck Parts Catalog, and the section on the cargo door weatherstrip is a very short section indeed; the entire thing reads like this for all B1,2,3 models: "Weatherstrip - Side and rear Cargo Doors B1,2,3" 4087141 - Weatherstrip, Side cargo door, Frt 4087142 - Rear Cargo door right 4081598 - Weatherstrip, Side cargo door, Rear 4087143 - Rear Cargo Door Left 3493825 - Header Side and rear w/Studs (I think this is the flattened piece you were asking about) 3729425 - w/o Studs 3498298 - Baffle, Side And Rear Cargo Doors 3759944 - Retainer, Plastic (these are the pins that hold the piece down which you were asking about) That's all there is! This would indicate that there definitely are differences between the side and rear cargo doors, but that the Headers were the same between the side and rear cargo doors. The weatherstrip was a constant in all B series vans, and over that entire period of time. If someone can cough up the numbers from your weatherstripping, it might just match up with some of the parts in that list. Keep in mind that 1978 was the crossover year when many things changed... Nate might be able to get into the fine details of that. In reference to your pictures, the side and rear cargo doors on my 1981 B250 both have the square shaped molded header, which goes on the bottom of the door. The molded header at the top is a more complicated tapered shape, with a metal reinforcing tab molded inside so the retainer pin won't rip out. BTW, MoonShadow has a 1977 Dodge van that looks to be in really well maintained condition, it might be well worth asking what type weatherstrip is on that van compared to yours. I have a set of new old stock side cargo door seals, plus several used sets of rear cargo door seals from various 80's & 90's vans, but they're all buried in my garage at the moment. I could probably get at them if you need more comparison info from later models. Please keep us up to date on your progress!
-It's been such a LONG TIME... BlueShift>> 1981 Dodge Ram B250 Custom Sportsman Maxi Van It's what you learn after you know it all, that counts... Are you living to work, or working to live? Learning from my own mistakes is good, learning from yours would be much better! | | | Re: Metro rubber needs input | Joined: Oct 2009 Posts: 2,825 veteran | veteran Joined: Oct 2009 Posts: 2,825 | I just got off the phone with Mike at Metro. There is some conflict with the end of one of the side doors. He has mine and another one that was sent and the ends don't match. He doesn't want to make two different styles. This is the one end that is different. If you have this end let me know what year van it's on and if it's top or bottom. He's trying to get the P# off this one, but it is pretty well worn. If you could give the P# off your side rubber and what year of van it will help. He wants to make sure that all the door seals will fit '71-'77 models. He also stated they will sell it by the foot with out the ends and pins. Hopefully that will help others with out barn doors!!! Maybe gullwing or one piece doors? Richard I got 79 B-200 and my side door & rear rubber looks like the 1 with the wide flat part,it is overlaped buy rubber on other door when they come together.... 79 B-200
| | | Re: Metro rubber needs input | Joined: Oct 2009 Posts: 2,825 veteran | veteran Joined: Oct 2009 Posts: 2,825 | 79 B-200
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Ram4ever; Thanks for the comment and the P#'s. I want to give back something to the vanner's out there. So many have done something to keep these vans on the streets and to keep Vannin alive, so I wanted to do my part. I noticed all the P#'s for the door seals were sequential except for the side rear, which is the one in question. I think that one received the most changes when the '78 rolled out. I know the windows were bigger, but what other differences were there to have to have the seal changed. They still ran the same header, but yet on a '71-77 people who have tried '78-up seals state they won't work. We will work this out and get our seals. Thanks again for the help!!!!!
heavy389; Thanks for the pics!! They really will help.(I was wondering if there is a P# on it?) I forwarded the pics to Mike at Metro as I did the P#'s furnished by Ram4ever. Every little bit helps us get closer to new seals.
Thanks for all the help guys!!!!
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 107 member | member Joined: Jun 2010 Posts: 107 | My door seals look real similar to above. With the exception of one, which is oddly in good shape. Then my pop-out windows (Sportsman van), are in real bad shape as well, just not crispy and breaking into hard peices.
'76 B200 Sportsman Royal SE D-code/440 auto/727
'76 W200 Adventurer Crew Cab D-code/440 4spd/NP435
| | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Didn't the bottom back part of the rear side door get cut a little angled on the later vans vs. the earlier 71-74 or 75 vans? I know on my van the door goes straight down to the corner at the rear of it, and some vans later on had that "angled forward" corner. Maybe that affects the seal area??
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Sep 2008 Posts: 1,229 old hand | old hand Joined: Sep 2008 Posts: 1,229 | 78 I do believe,the 'cross dress er cross over' year.
79 B300 4x4,80 B100,83 B150.If it's not a van I just don't understand it.
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Thanks I checked and found that '78 is when they started cuttin corners Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Oct 2009 Posts: 2,825 veteran | veteran Joined: Oct 2009 Posts: 2,825 | Thanks I checked and found that '78 is when they started cuttin corners Richard 79 B-200
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Well I got a surprise visit from UPS today. I didn't order anything so what could it be. To my surprise there were two boxes inside the one. OK now both have Metro Rubber stamped on them, both have different part #'s. So lets see, well they are the prototype rear barn door weather seals. Man do they look great. I have to try them out and see if they fit correctly, seal correctly and look correctly. If they pass all that I get to sign a paper with my thoughts on the three things and if they meet all, they will go into production. We will have our seals. Also the guys with Gullwings will be able to order with out the ends and pins. May be that way will also work on the one piece doors? Any how we are one step closer to getting them. I am so ecstatic. They will be out just in time for my van. Should be painted by then. And if they do good in sales the side barn doors are not far behind. I think this is great news for the Dodge family. Here are pics of them
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jan 2012 Posts: 488 addict | addict Joined: Jan 2012 Posts: 488 | More Rubber -
Eagle Dave
Eagles Nest (1977 Chevy Van)
Member Bama Vans
| | | Re: Metro rubber needs input | Joined: Oct 2001 Posts: 28,125 Madman! | Madman! Joined: Oct 2001 Posts: 28,125 | | | | Re: Metro rubber needs input | Joined: Aug 2005 Posts: 21,211 Likes: 25 Supreme Master | Supreme Master Joined: Aug 2005 Posts: 21,211 Likes: 25 | The quality looks amazing!
Nate Breece | | | Re: Metro rubber needs input | Joined: Jul 2009 Posts: 6,258 Likes: 164 Master Metal Sculptor | Master Metal Sculptor Joined: Jul 2009 Posts: 6,258 Likes: 164 | | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | ME WANT! NAAAOOOO! lol. Yeah i need weatherstripping for my side and rear barn doors bad :/
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Aug 2008 Posts: 18,213 Likes: 2 Supreme Master | Supreme Master Joined: Aug 2008 Posts: 18,213 Likes: 2 |
Everyday above ground is a Good Day!!! Never Stop Vannin'
Member of Break Away Vanners Host of Spring Break At Shenandoah Acres Family Campground
Owner & Creator of Wizard's Van-In Videos Member of Riding High Truckers from 1982 to 1996 2nd Member of The Toopa Sinner Tribe Member of Free Bird Vanners 1996 to Present Member of Cape Atlantic Truckers South Jersey Host Club of Freeze Out Certified Nats Judge Member of Shenandoah Valley Vans | | | Re: Metro rubber needs input | Joined: Oct 2009 Posts: 2,825 veteran | veteran Joined: Oct 2009 Posts: 2,825 | Great let me know,will B looking for it in rolls for the gullwing maybe... 79 B-200
| | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Any Updates on when the cargo and side doors will be released?
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Jul 2011 Posts: 492 addict | addict Joined: Jul 2011 Posts: 492 | Sweet! I need the rear seals redone worse than anything on my van right now! Those look nice! How did they end up fitting? Did they get a bill of approval?
Bramble On! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Update; Mike at metro, Matt at Department of Customz and I are working on getting a couple of small issues worked out and then straight to production. I guarantee you Dodge guys will be happy with these seals. I am!!!!
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Good! My van is a fair weather beast currently with only old front door seals installed (yeah, I didn't do all of the front door seal install yet. Got the window beltline stuff installed, was pretty quick )
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Jul 2011 Posts: 492 addict | addict Joined: Jul 2011 Posts: 492 | I just received this from Mike at Metro when I went fishing for an update:
"We are working on revising the rear door seals and hope to have them ready in the spring. We then will work on the side cargo door seals—they will take less time as they seem to use several of the same components. Thanks for your interest." Best regards, Mike Hinshaw New Product Development Manager Metro Moulded Parts, Inc. 11610 Jay Street, P.O. Box 48130 Minneapolis, MN 55448
Bramble On! | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Sweet!!! My doors need rubber for protection!!! lol
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Any Update on the Side or Rear door rubber?? I'm still in NEED!
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Time to resurrect this old thread with some good news. I just received this from Mike at Metro;
Richard,
At long last, we have finalized our rear cargo door seals—p/n’s LM 123-VA (left) and LM 123-VB (right). I will send you a set of the finalized prototypes next week.
I expect releasing them by month’s end with product availability in December. We will pivot to the side cargo door seals now. They will not take near as much time to develop since they use all of the same elements the rear seals do.
I would appreciate it if you could post something on your forums to inform your fellow enthusiasts about this updated info.
Thanks for your patience and assistance.
Best regards,
Mike Hinshaw
Metro Moulded Parts
So now they are working on the side barn door seals and should soon follow.
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jul 2009 Posts: 6,258 Likes: 164 Master Metal Sculptor | Master Metal Sculptor Joined: Jul 2009 Posts: 6,258 Likes: 164 | Sweeeeet!!! A lot of people (me included) will be looking forward to these! | | | Re: Metro rubber needs input | Joined: May 2006 Posts: 3,113 Likes: 2 pooh-bah | pooh-bah Joined: May 2006 Posts: 3,113 Likes: 2 | | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Me too, the used rubber I put on my van is doing OK but I want this thing sealed up!
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Nov 2011 Posts: 48 Likes: 2 newbie | newbie Joined: Nov 2011 Posts: 48 Likes: 2 | | | | Re: Metro rubber needs input | Joined: Dec 2001 Posts: 3,456 Likes: 24 pooh-bah | pooh-bah Joined: Dec 2001 Posts: 3,456 Likes: 24 | Hopefully these will solve many of the Mid Dodge owners needs. I just bought a decent set off a van over the weekend. Don't need them but I could not have left them behind.
1973 Dodge Shorty B-100 1995 Chevy G20 Gladiator
Life should not be a journey to the grave with the intention of arriving safely in a well preserve body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and proclaiming
"Wow What a Ride"
Johnny O "O Vanners" of Connecticut! Since 1982
| | | Re: Metro rubber needs input | Joined: Nov 2011 Posts: 48 Likes: 2 newbie | newbie Joined: Nov 2011 Posts: 48 Likes: 2 | Just got an email today from Hinshaw at MPP, the weatherstrip for the rear doors is available now! They are not on the website yet, you have to call them. Part numbers are LM123 VA and LM123 VB. | | | Re: Metro rubber needs input | Joined: May 2006 Posts: 3,113 Likes: 2 pooh-bah | pooh-bah Joined: May 2006 Posts: 3,113 Likes: 2 | | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 |
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I see you beat me to the posting. Cool!!
Lets hope they sell, so Metro will do the side barn doors next!!! So buy up!!!
Richard
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Oct 2009 Posts: 2,825 veteran | veteran Joined: Oct 2009 Posts: 2,825 | what ever happen to being able to buy rolls of the stuff...for use on gullwings? 79 B-200
| | | Re: Metro rubber needs input | Joined: Mar 2007 Posts: 29 newbie | newbie Joined: Mar 2007 Posts: 29 | Oh man that's so awesome! I'm getting some asap! That's going to be nice not hearing those doors rattle around!
1977 Dodge Tradesman B200 Ram Van! (360-2bbl) 440 Coming soon! 1995 Dodge B2500 Maxi cargo 5.2l
| | | Re: Metro rubber needs input | Joined: Jul 2009 Posts: 6,258 Likes: 164 Master Metal Sculptor | Master Metal Sculptor Joined: Jul 2009 Posts: 6,258 Likes: 164 | Sweet. I need some. Do they have front doors as well? | | | Re: Metro rubber needs input | Joined: Mar 2007 Posts: 29 newbie | newbie Joined: Mar 2007 Posts: 29 |
1977 Dodge Tradesman B200 Ram Van! (360-2bbl) 440 Coming soon! 1995 Dodge B2500 Maxi cargo 5.2l
| | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | FYI, these products are listed on their website in the "new products" section. Just checked And just ordered some for my rear doors!
Last edited by Alikazam; February 22nd 2013 9:32 am.
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Aug 2005 Posts: 21,211 Likes: 25 Supreme Master | Supreme Master Joined: Aug 2005 Posts: 21,211 Likes: 25 | Cool! But...are these for the side or rear cargo doors?
Nate Breece | | | Re: Metro rubber needs input | Joined: Aug 2005 Posts: 21,211 Likes: 25 Supreme Master | Supreme Master Joined: Aug 2005 Posts: 21,211 Likes: 25 | Nevermind...they are for the rear cargo doors.
Wonder if they'll do side doors next.
Nate Breece | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | what ever happen to being able to buy rolls of the stuff...for use on gullwings? Call Metro Rubber. They said it would be available.
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Nevermind...they are for the rear cargo doors.
Wonder if they'll do side doors next. Mike at Metro said if the sales are good for the rears, they will do the sides. They just sent back the NOS rears I sent for the sample, but they kept the sides I also sent them. This may mean the sides could be on the way. I will email him to find out.
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I added this to a post under General Discussion, but I thought I should post it here for the Dodge guys. I received yesterday the side barn door prototype seals. I will be trying them out today and if all goes right we should have them soon!!!!!!!!!! I will let you guys know how it goes!!!
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jul 2005 Posts: 1,846 Likes: 2 veteran | veteran Joined: Jul 2005 Posts: 1,846 Likes: 2 | | | | Re: Metro rubber needs input | Joined: Sep 2009 Posts: 868 Likes: 2 old hand | old hand Joined: Sep 2009 Posts: 868 Likes: 2 | Great! Looking forward to it.
1972 Dodge Van "Tigerlilly" - Blazing Copper/Sandstone Metallic - 3850 lbs empty 13.47 @ 97.53 mph N/A - 11.94 @ 113.33 mph N2O - old 360/727 + Nitrous (N2O)combo Viper V10 + 4L80E conversion in progress...
2009 Dodge Challenger SRT8 "Leelu" - TorRed - 6.1L Hemi/6 speed - Supercharged - SOLD
1990 Celica Alltrac "Emma" - 2.0L 4cyl Turbo AWD - 327awhp - 21-22mpg freeway, 17-ish mixed daily use - 13.2 @ 108 best so far.
2007 Chrysler 300C SRT8 "Ruby Rod" - 6.1L Hemi - pretty much bone stock driver - With 425hp
| | | Re: Metro rubber needs input | Joined: Mar 2007 Posts: 4,463 Likes: 12 pooh-bah | pooh-bah Joined: Mar 2007 Posts: 4,463 Likes: 12 | Thanks for keeping us up to date FinallyaVanner. Have you heard what years the new side seals would cover?
-It's been such a LONG TIME... BlueShift>> 1981 Dodge Ram B250 Custom Sportsman Maxi Van It's what you learn after you know it all, that counts... Are you living to work, or working to live? Learning from my own mistakes is good, learning from yours would be much better! | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | No problem!!!
Right now they only list them to fit '71-'77 due to door changes in '78. When they come out maybe someone can try them on '78 and newer vans to see if they fit out of the box or with a little modding!
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Feb 2005 Posts: 1,772 Vapor Vanner | Vapor Vanner Joined: Feb 2005 Posts: 1,772 | Any update on how the side door rubber fits?
thanks
Everything's Temporary
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | Yes, They fit nicely only issue was some pin placement. Metro has a NOS original and a factory superseded set and the pin configuration is different in certain parts of the two sets of seals. I sent them pics, measurements and pin locations that were off or not there at all. So when that is ironed out they will be hitting the market!!! So soon!!!
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber try this | Joined: Nov 2012 Posts: 838 old hand | old hand Joined: Nov 2012 Posts: 838 | car parts...25.00 bucks metro driver and passenger door seals...windshield and lock strip 65.00-3.75 ...rock auto has the rest ...window channel and weather strip sweep, also side cargo doors...no side cargo door or rear cargo door window seals
Greeting From Reading,PA....Found My First 70'S STREET VAN....Always Wanted One Since i Was a Teen But Could'nt Afford, Hope i Can Now LOL... It Was a Great Era To Grow Up In The Music,Cars,Parties
| | | Re: Metro rubber try this | Joined: Oct 2013 Posts: 17 stranger | stranger Joined: Oct 2013 Posts: 17 | Hi,
I have a 78 B200, so the same front grill as the 77, but my rear lights are vertical in place of horizontal, and I have big side markers in front and rear.
Are my cargo doors the same as a 77 or a 79 ??
I need rear and side cargo seals are they are missing...
What is the difference between the rear and side doors ? Are they interchangeable ?
Thanks
David | | | Re: Metro rubber try this | Joined: Nov 2012 Posts: 838 old hand | old hand Joined: Nov 2012 Posts: 838 | metro..still no side door seals available...??? need badly
Greeting From Reading,PA....Found My First 70'S STREET VAN....Always Wanted One Since i Was a Teen But Could'nt Afford, Hope i Can Now LOL... It Was a Great Era To Grow Up In The Music,Cars,Parties
| | | Re: Metro rubber try this | Joined: May 2006 Posts: 3,113 Likes: 2 pooh-bah | pooh-bah Joined: May 2006 Posts: 3,113 Likes: 2 | The rear doors are shorter then the sides. The side doors from a '78 would be the same as ones from a '79 and newer. | | | Re: Metro rubber try this | Joined: Feb 2009 Posts: 1,475 old hand | old hand Joined: Feb 2009 Posts: 1,475 | Wish I could find '78-up side cargo door seals. Mine are disintegrating rapidly. Anyone know if the '71-'77 rear cargo door seals will fit '79-up? Need those too.
Matt K. Flyin' Dutchmen Vans, Lancaster PA 1989 GMC Safari Cargo | | | Re: Metro rubber needs input | Joined: Nov 2012 Posts: 838 old hand | old hand Joined: Nov 2012 Posts: 838 | yea hope they come out soon !!
Greeting From Reading,PA....Found My First 70'S STREET VAN....Always Wanted One Since i Was a Teen But Could'nt Afford, Hope i Can Now LOL... It Was a Great Era To Grow Up In The Music,Cars,Parties
| | | Re: Metro needs input.. call and pest them | Joined: Nov 2012 Posts: 838 old hand | old hand Joined: Nov 2012 Posts: 838 | call and email more guys that inquire my speed up production...Cory Petros Metro Moulded Parts 866-910-7849 coryp@metrommp.com www.metrommp.com
Greeting From Reading,PA....Found My First 70'S STREET VAN....Always Wanted One Since i Was a Teen But Could'nt Afford, Hope i Can Now LOL... It Was a Great Era To Grow Up In The Music,Cars,Parties
| | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 1,105 Likes: 1 old hand | OP old hand Joined: Jun 2010 Posts: 1,105 Likes: 1 | I received this e-mail today;
Richard,
Good afternoon. I have great news…at long last, we have approved our current prototypes of the side cargo door seals.
It will take a few days to complete the paperwork on them but I anticipate releasing them by the end of this month. We should be shipping product by late August.
Thought you should be the first one outside of Metro to know.
Thanks,
Mike
Soon we can seal all '71-'77 Barn door Dodge van!!!! Next factory singles!! I think you can buy it by the foot for clam doors!!
It is better to have Van'd once in your life, then to never had Van'd at all! | | | Re: Metro rubber needs input | Joined: Jun 2011 Posts: 29 newbie | newbie Joined: Jun 2011 Posts: 29 | Great News! Thanks for the update...
Live Fast but Save Some for Later!
| | | Re: Metro rubber needs input | Joined: May 2006 Posts: 3,113 Likes: 2 pooh-bah | pooh-bah Joined: May 2006 Posts: 3,113 Likes: 2 | | | | Re: Metro rubber needs input | Joined: Jan 2001 Posts: 2,969 Likes: 64 veteran | veteran Joined: Jan 2001 Posts: 2,969 Likes: 64 | Thanks to all involved in keeping the ball rolling and getting these seals reproduced. There probably isn't a surviving Mid out there that couldn't use a new set on the side doors. While the seals for the rear doors do show up on occasion on ebay and a couple other sites, the side doors have been hard to find for many years now. I know a vanner who found a set several years ago at Collector Supply which I believe is in Washington state. He did an exhaustive internet search for many months before locating them. He contacted me the day he bought them, I told him to make sure they were the old part number, and not the superceded numbers they used on the 1978 ups, which the weatherstrip is a bit thicker. | | | Re: Metro rubber needs input | Joined: Aug 2010 Posts: 336 enthusiast | enthusiast Joined: Aug 2010 Posts: 336 | have not been on too much lately. the last two years i have been able to get all the new rubber seals except the forward side door. two years ago i got the back door rubber for my 79 b200 (and paid alot) and also the side rear door. collector supply said at the time i took the last. have not checked with them for a while. has anyone figured out what to do for the side doors? one more door to go! | | | Re: Metro rubber needs input | Joined: Feb 2015 Posts: 163 member | member Joined: Feb 2015 Posts: 163 | Just thought I'd post this here for those of us with newer vans needing the same thing. I talked with metro and will be sending them drawings and specs for the side cargo doors of my 1981 B250. Gonna try and match to an already available product first but maybe we can get them to finally start producing these too. That would be sweet as my sides and rears are toast....
Just putting it here because this post always comes up in my searches for a door seal solution. | | | Re: Metro rubber needs input | Joined: Jun 2010 Posts: 18,308 Likes: 568 | Joined: Jun 2010 Posts: 18,308 Likes: 568 | Welcome to the site jamesdak .....
SUNSHINE VANS-VAN DIEGO ADRENALIN BY THE GALLON & CHASIN RACIN ONE FOR THE DIRT & ONE FOR THE STREETS '93 CHEVY G30 454 4X4 SPORTVAN EXT 146" WB '92 CHEVY G30 454 BEAUVILLE EXT 146" WB | | |
Forums68 Topics35,842 Posts538,396 Members12,735 | Most Online177 May 8th, 2013 | | | |